OK I just swapped a 2002 focus engine into my 96 mystique. The engine had 8k miles when installed and now has 9k miles. I already picked up a T3 turbo for $30 that needs a rebuild due to slight shaft play. I also picked up a good sized intercooler for $20 off of a dodge daytona that is in excellent shape and clean inside and out. First off the turbo I need new turbine shaft bearings and the turbine shaft seal and the dynamic compressor seal. These items are pictured in this kit http://www.saabperformanceparts.com/item107.htm
do I need the other items in the kit as well besides the O-rings. I don't believe the two rubber o-rings move so I could even use gasket maker, but I am not going to!!! This turbo is internally balanced so no balancing is required when done.

ATX MTX swap, rear drum disc swap, drilled rotors, ported intake, optim throttle body, CAI, 7.5L MAF, adj. fuel regulator, longtube headers, underdrive pulley, no EGR, low inpedence bigger injectors, 2002 Focus Swap