Originally posted by RawBurt:
Mine got shipped out today. Goonz, you should write up a short how to... or just some tips or something. I'm sure the install is not too complicated though.



Install is a piece of cake.. Especially with the B&M, where you won't need any kind of riser plates.. Once you get the center console out, everything is very straight forward on what needs to be removed.. You should have 4 hex bolts on top, holding everything down. Remove them and release the shift cables and the shifter should come right out. Depending on the model of shifter tower, there's either a c-clip or another form of round clip that may need to be removed.

Mark

2000 Black CSVT 3.0L Hybrid - 206fwhp & 195fwtq