It has been brought to my attention that MY98.5 Contour, Mystique and Cougar may have a clearance issue with the fuel tank. The drivers side swaybar bracket may not have enough material removed to clear the fuel tank. The Subframe will not bolt into place if this is the case.

Only the first batch of Subframes is affected, the second and third batch have been modified to correct this potential issue. The Subframes listed with BAT came from the second batch so their units will not have any issues.

MY99 and up are not affected and should not have any issues with clearance.

Those who have recieved the Subframe and own a vehicle MY98.5 or older should remove a small amount of material from the swaybar bracket for clearance, thsi should be less than 1/8" on the inboard side of the swaybar bracket.

Please let me know if you have any questions.

Sorry for the inconvience.

Maxwell Church Nemo Malus Felix ATI Performance Engineering 47199 Cartier Drive Wixom MI 48393 248*848*9200 ext 131 248*894*2219 direct