Contour Enthusiasts Group Archives Forums General Group Buy poly rear roll resistor GB...it's on

Originally posted by Mkingracing:

---

I'm sorry, let me elaborate, i meant a "how-to" on replacing these on your car. Make this one the the great How-too's on our how-too list. A step by step process of replacing this roll resistor.

---

my bad:must have overlooked this post-it's very simple....(these are for 98+, i don't know if pre98 instructions are different)

1)jack up car\support with stands

Front:
2)remove thru bolt from forward located mount(connects to subframe)
2)remove two nuts holding mount to subframe
3)remove mount

Rear:
2)remove three bolts holding mount to subframe
3)remove thru bolt from mount
3)catch mount as it falls on your chest

intall is reverse of removal

the only tools you'll need are a 15mm deep socket, a breaker bar, and a good size can of wd-40(not including the jack and stands).