|
Joined: Nov 2001
Posts: 725
Veteran CEG\'er
|
Veteran CEG\'er
Joined: Nov 2001
Posts: 725 |
Originally posted by MarkusSVT: So my question now is.... WTF???? what the hell happened to the forty people who said they were either interested or said that they were in????? I know that you can only count on about half of those to actually do anything but geez... I did a ton of work to set this thing up and only 5 people actually get anything. I was doing this GB as a favor to the people who cant afford to spend a $hit load of money in wheels and tires, and from all of the responses i expected a little more than 5 people..... I dont think i am going to set up any more GB's especially if it is only a christmas wish list and not a true interest list.
Sorry for the rant but this kinda $hit es me off, and it happens all the time. So dont say you are in, and ask me to do the work for you, and then just dissapear like you dont matter, because it is people who do that, that make our aftermarket so small.... There, thats it, i have said my peace. I hope that the people who purchase wheels enjoy their selection, and i appreciate their genuine interest!!!!
Sincerely, Markussvt
they only had one set of RS6 in 18"s and they're gone. i'm on indefinite back order and i was told that it could be a month or upto 3 months before they get another set from Enkei. I'm not even sure if i'll get the discount price in 3 months from now. I'm going to give discount tire up to one month then i'll decide if i want to go elsewhere, sorry man but 3 months is too long.
95 SE MTX
DH UIM, 65mm TB, SC CAI, Quaife, Centerforce, Fidanza, UR Pulley, F/R Strut Braces, Cross Drilled Rotors, S.S. Brake Hoses, 18" Enkei RS5, SVT Engine Mounts+Inserts, MSDS & y-pipe, Trubendz resonated exhaust & MagnaFlow cat
|
|
|
|
Joined: Oct 2002
Posts: 112
CEG\'er
|
CEG\'er
Joined: Oct 2002
Posts: 112 |
I'm IN!!! I'm jus trying to make my final decision on exactly what I want but its hard cuz i don't know anything about the whole which tires and the size thing and everything... LOL
98 T-red Contour LX Zetec (100k miles)
98 T-red CSVT (40k miles)
18" Enkei Rs5's
Pioneer Premier 740
12" Rockford HE powered by 420 watt amp
C27 Front Fascia
|
|
|
|
Joined: Aug 2002
Posts: 137
CEG\'er
|
CEG\'er
Joined: Aug 2002
Posts: 137 |
I am 90% sure i am in. Can i get a price for FALKEN AZENIS ST115 on ENKEI RS5 ?
|
|
|
|
Joined: Oct 2002
Posts: 432
CEG\'er
|
CEG\'er
Joined: Oct 2002
Posts: 432 |
Originally posted by MarkusSVT: from all of the responses i expected a little more than 5 people.....
I just talked to Jason about getting 17" RS5s. He said a LOT of guys had been calling on this buy and they were all out. I don't know if this is just one of the distribution centers or all four. But he told me they were hoping to get some more in by the end of April (before the GB ends).
Originally posted by abwamo: I'm not even sure if i'll get the discount price in 3 months from now
I asked if I would still get the discounted price if the wheels weren't in by the time the GB was over. He told me no.
Bill
'00 SVT Black/Tan
|
|
|
|
Joined: Jul 2002
Posts: 180
CEG'er
|
CEG'er
Joined: Jul 2002
Posts: 180 |
Originally posted by EvlBill: Originally posted by MarkusSVT: from all of the responses i expected a little more than 5 people.....
I just talked to Jason about getting 17" RS5s. He said a LOT of guys had been calling on this buy and they were all out. I don't know if this is just one of the distribution centers or all four. But he told me they were hoping to get some more in by the end of April (before the GB ends).
Originally posted by abwamo: I'm not even sure if i'll get the discount price in 3 months from now
I asked if I would still get the discounted price if the wheels weren't in by the time the GB was over. He told me no.
Hmmm, the site says Arizona and Nevada still have them. I sure hope so because im in AZ and looking for some RS-5s.
98 svt
|
|
|
|
Joined: Nov 2001
Posts: 725
Veteran CEG\'er
|
Veteran CEG\'er
Joined: Nov 2001
Posts: 725 |
the RS6s are on back order not the RS5s
95 SE MTX
DH UIM, 65mm TB, SC CAI, Quaife, Centerforce, Fidanza, UR Pulley, F/R Strut Braces, Cross Drilled Rotors, S.S. Brake Hoses, 18" Enkei RS5, SVT Engine Mounts+Inserts, MSDS & y-pipe, Trubendz resonated exhaust & MagnaFlow cat
|
|
|
|
Joined: Nov 2001
Posts: 725
Veteran CEG\'er
|
Veteran CEG\'er
Joined: Nov 2001
Posts: 725 |
i called back and changed my order, i'm getting the RS5 in 18" instead. i would've prefered the RS6 but 3 month back order is way too long of a wait, i'm not sure if i can wait 10 days for the wheels to get here now. thanks Markus
95 SE MTX
DH UIM, 65mm TB, SC CAI, Quaife, Centerforce, Fidanza, UR Pulley, F/R Strut Braces, Cross Drilled Rotors, S.S. Brake Hoses, 18" Enkei RS5, SVT Engine Mounts+Inserts, MSDS & y-pipe, Trubendz resonated exhaust & MagnaFlow cat
|
|
|
|
Joined: Mar 2003
Posts: 390
CEG\'er
|
CEG\'er
Joined: Mar 2003
Posts: 390 |
Sweet I ordered my RS5s on Kumhos ECSTA 712s friday Thanks Markus
|
|
|
|
Joined: Dec 2002
Posts: 3,887
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Dec 2002
Posts: 3,887 |
06 GMC Sierra 2500HD Dmax/ally
06 Pontiac G6 GT
05 CRF250R
FOR SALE 06 KX65 with riding gear $2700 obo
|
|
|
|
Joined: Nov 2002
Posts: 8,143
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Nov 2002
Posts: 8,143 |
can you give me an exact price on 17" Enkei CDR9's w/ 215/45/17 Ventus HRII H405 tires.
I was looking at the prices from the old thread and it wasn't adding up to the price I was told earlier...
|
|
|
|
|