Contour Enthusiasts Group Archives Forums Modifications Forced Induction VCM-1000

Well guys, My super charger project was a flop. I was able to fit the charger in place with the custom made brackets but the belt alignment was a problem. The only possiable solution was to reces the head by grinding it about 5/16 of an inch. But lets just say it didn't seem like a bright Idea.. So I aborted the project "didnt want to deal with a jack shaft set up"

So now I am looking at the VCM-1000 Can any one tell me what year these kits will fit, Because I am not sure what year my car is 98, 98.5 "not sure" heard so many differnt was to decifer the years... From what I found the only fit 99-00.... But again any help is appreciated

NEED MORE POOWWWAAAAA!!!!!!

Are you talking about the Venom kit? If you are, I still have my VCN-2000 for sale. It has every thing you need including a new wiring harness, two bottles, a new valve and a bottle warmer. PM me if you are interested. And yes, it will work on your car.

Josh

Get it! I asked about that kit from Josh (Hi Josh) and that's a good price. I'm going to turbo route, now so I can't get it.

Ya, thats it...

Why is the 98 Excluded on Venoms Product application page???? Just wondering

That's a good question, call them. They've got a really great tech department. When I was looking at doing a GB they didn't have the part # on the website. I called to get one and they looked all over 'til they found the right one. The guy could even answer all my questions which I thought was impressive as it is not a 'main production' kit, but one adapted for the Contours.

I've been looking at all the nitrous manafactuers, but few seem to list any product's for the CSVT...

So If any of you have had any luck locating a quility Nitrous kit at a resonable price let me know!!!!!

One more question, I thought the CSVT had a problem with spraying Dry Nitrous because of the intake runner desighn that only allows the first few cylinders to get any juice ?????


So if someone could explain or provide a solution I would be greatfull!!!

I can't answer your last question but if you go with a dry nos system made by Nos, you should have no problem. I will get you a part #, pm me, I think it's around $500, easy to put it in, if you got more questions just ask.

I'm/ was running a homemade wet kit.

As for the intake question....what intake was designed to have n2o OR fuel run thru it? NONE.

Originally posted by RTStabler51:

---

I'm/ was running a homemade wet kit.

As for the intake question....what intake was designed to have n2o OR fuel run thru it? NONE.

---

Isn't there a way you can run the nitrous through the fuel rail so that it is sprayed through the injectors with the fuel??? Thus distributing it evenly through all 6 cylinders

Yup, someone here has that setup, I don't remember his name, I have a picture of it at work