Previous Thread
Next Thread
Print Thread
Joined: Oct 2005
Posts: 5
R
Newbie
OP Offline
Newbie
R
Joined: Oct 2005
Posts: 5
1998 2.5 Contour SE 91k++ miles I bought the car from a friend and the speed and odo were not working, but after driving by the tach for over a year i'm ready for the speed to work.

I have inspected the cable in the engine compartment and checked all the fuses i could find.

Could it be the sending unit on the transmission or wherever that is located?

Any info would be great.

Jason Holden

Joined: Aug 2004
Posts: 2,659
J
Hard-core CEG\'er
Offline
Hard-core CEG\'er
J
Joined: Aug 2004
Posts: 2,659
Try going to the junk yard and picking up a new cluster. You may just have dead needles that dont work. Did your buddy have an aftermarket overlay or did he still have the stock one. Good luck and keep us posted.



"Do what you like, Because you have to drive it!"-Me 99 Contour LX 95 Mustang GT Convertible 97 Z24 Cavalier
Joined: Jun 2005
Posts: 5,345
T
Addicted CEG\'er
Offline
Addicted CEG\'er
T
Joined: Jun 2005
Posts: 5,345
Originally posted by RamAir00:
1998 2.5 Contour SE 91k++ miles I bought the car from a friend and the speed and odo were not working,...




If it is a manual tranny, change the Vehicle Speed Sensor. You will need to drain and refill the fluid too. Just in case pieces of the VSS fell in the tranny.


"Always do the cheap and easy ones first." 1996 V6 ATX 96K miles
Joined: Aug 2002
Posts: 8,281
S
Captain Impound Boy
Offline
Captain Impound Boy
S
Joined: Aug 2002
Posts: 8,281
you'll be lucky if you can get the VSS peice that broke out of the speedo gear!

Joined: Jan 2006
Posts: 75
D
CEG\'er
Offline
CEG\'er
D
Joined: Jan 2006
Posts: 75
If you get yours fixed, let me know what you did. I have a 1998 Zetec automatic that is out to. Checked fuses and it is plugged in good.

Joined: Jun 2005
Posts: 5,345
T
Addicted CEG\'er
Offline
Addicted CEG\'er
T
Joined: Jun 2005
Posts: 5,345
Originally posted by Dec1000:
If you get yours fixed, let me know what you did. I have a 1998 Zetec automatic that is out to. ...



For an ATX, if you are having speedometer issues (and you have determined it is not the connector or wiring, you need to change the VSS right away or you are looking at long term damage to the ATX.
http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=trouble&Number=1289620&Forum=trouble&Words=correct%20part%20number&Match=Entire%20Phrase&Searchpage=0&Limit=25&Old=1month&Main=1289540&Search=true#Post1289620


"Always do the cheap and easy ones first." 1996 V6 ATX 96K miles

Moderated by  horseydug_dup1, Ray_dup1 

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5