Contour Enthusiasts Group Archives Forums Modifications 3.0L Duratec Vaccum line pics anyone?

I want to verify my vac lines are correct. I had one red line with a fitting that was left out of the loop and I found another line today that is gray. I don't know if they go together or not so I'm looking for some pictures of the area. I would like pics of them installed how they should be, not any "stickies" bs that shows them all unhooked. If anyone has a moment to snap one or can find one, It would be appreciated.

IIRC, the one you posted about earlier connects to a vac line coming from the EVAP canister. It should run across the firewall.

Yea it is the same one I posted about before. The problem I'm encountering is it is tight as hell near the back of the firewall, and its pretty dfficult to follow any vac. line. I was hopeing that someone would have a picture of where they all meet up, so I can see where everything is running, and which color lines connect where in that spot. I took pics of that area before the swap but I must have misplaced them. So if someone has a picture of the area in question (so i can see the color of the lines etc) it'd be appreciated

3.0L Taurus Duratec. Not sure if Fig 10 will help you much but it has the color codes on the lines.
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1a/f9/23/0900823d801af923.jsp