Contour Enthusiasts Group Archives Forums General Troubleshooting timing belt tensioner

i'm working on puting the head back on my 95 contour zetec, and i read on one of the forums that some kind of tensioner spring is used when replacing the timing belt, my 'tour doesnt seem to have this spring for the belt, and i cant seem to order it at a parts store without ordering the whole belt tensioner assembley (all i need is the spring and the bolt), does anyone know the part number, or if i'm just telling the parts guy the wrong name for the part(belt tensioner, sound right?).

This thread has some good info.
http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=zetecmaint&Number=672210&Forum=zetecmaint&Words=faq&Match=Entire%20Phrase&Searchpage=1&Limit=25&Old=allposts&Main=672210&Search=true#Post672210

Exact part numbers.
http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=zetecmaint&Number=1275164&Forum=zetecmaint&Words=tensioner&Match=Entire%20Phrase&Searchpage=0&Limit=25&Old=3months&Main=1275019&Search=true#Post1275164

my contour didnt hace one too i just took a rench to the tensioner and tightend it up until i was happy on how tight it was

Screw - W700001-S1309 (the bag says 'screw')
Spring - F5RZ-6L273-A
These numbers are from the parts bags sitting in front of me , I just finished the Belt/Pump/Pulleys thing, also!

NOTE:
1) the hole for the 'screw' is NOT visable. Feel around under the Exhaust cam pulley
2) after all the adjustments are made, the 'screw' & 'spring' are removed. These two items are 'TOOLS', save them for later use.
3) Cam Holding Tool = 3/16" thick X 1" X 12" steel(3/16 = 0.188)