Previous Thread
Next Thread
Print Thread
Page 1 of 6 1 2 3 4 5 6
Joined: Jun 2006
Posts: 9
R
Newbie
OP Offline
Newbie
R
Joined: Jun 2006
Posts: 9
Hello Everyone at CEG

I am from the NECO (Cougar) Message board and I am selling the Thomas Knight Supercharger that I am sure you have all heard about. Well I would like to start a group buy for the Supercharger Kit here on CEG.
Note* The kit was designed and tested on the Mercury Cougar, but will work on the Ford Contour.

Here is the information straight from my post on the NECO (Cougar) Forums

-----------------------------------

Thomas Knight Supercharge Group Buy

___Pictures___
http://img.photobucket.com/albums/v3.../COUGARSC1.jpg
http://img.photobucket.com/albums/v3.../COUGARSC2.jpg
http://img.photobucket.com/albums/v3.../COUGARSC3.jpg
http://img.photobucket.com/albums/v3.../COUGARSC4.jpg
http://img.photobucket.com/albums/v3.../COUGARSC5.jpg
http://img.photobucket.com/albums/v3.../COUGARSC6.jpg
http://img.photobucket.com/albums/v3.../COUGARSC7.jpg
http://img.photobucket.com/albums/v3...INSTALLED1.jpg
http://img.photobucket.com/albums/v3...INSTALLED2.jpg
http://img.photobucket.com/albums/v3...RBDTPIPES2.jpg
http://img.photobucket.com/albums/v3...UNIT3LIGHT.jpg


___Pricing___
Retial without Gauges $2595
CEG/NECO Members without Gauges $2095
CEG Members Group Buy Price: $1995 (1-4 Buyers)
CEG Members Group Buy Price: $1945 (5-9 Buyers)
CEG Members Group Buy Price: $1905 (10+ Buyers)
Upgrade Kit (To reach 12 PSI of Boost) $795

Shipping $75

___Parts Information___
1999 Cougars can use Simple 12:1 FMU (EST. $100 via eBay)
2000+ Cougars need Extra Injector + Controller (EST. $400)
Fuel Controls will not be supplied
Pipes are Polished Aluminum.
Kit Includes Silicone Hoses and Filter (Red or Blue) Compressor Housing (Silver, Blue, or Red)

___Performance Information___
VERICOM On-Board DYNO shows
+55 Wheel HP at 5 PSI on a Stock ATX Cougar
(VERICOM Usually 5-10 HP Lower than DYNOJET)

___Ordering Information___
This group buy will be ending July 29th. You can pay for the kit anytime between now and then. I accept PayPal, Money Order Check, Credit Card (Visa, Mastercard, Discover, AmEx, JCB, Diners)
After Group Buy ends, kits will be made and shipped (3-4 weeks from end of GB date end)


___Kit_Information___
THE HEAD UNIT CONSISTS OF A DUAL BALL BEARING CARTRIDGE, T04E COMPRESSOR HOUSING, BACKING PLATE, AND A MONSTER T18 CATERPILLAR WHEEL ALL MACHINED TOGETHER TO FIT :-) IT MAKES 5 PSI. THE BELT DRIVE IS CAPABLE OF HANDLING A V8 MAKING 5 PSI AND 700 CFM. THE SAME BELT POWERDYNE USES. THE SYSTEM COMES WITH A CUSTOM PULLEY FOR THE POWER STEERING PUMP, AND DRIVE BELT FOR THE PULLEY TO JACKSHAFT, A COG BELT FOR THE BELT DRIVE TURBO, AND A CUSTOM STEEL ENGINE MOUNT SUPPORT WHICH DOUBLES AS THE SUPERCHARGER MOUNT. A SPECIAL FITTING FOR THE POWER STEERING LINE, THE BELT DRIVE TURBO (BDT) TO AIR METER PIPES & HOSES, ADAPTER, CLAMPS, HEATER HOSES AND ADAPTERS FOR RELOCATING THE OVERFLOW TANK, TIE WRAPS TO KEEP EVERYTHING NEAT, AIR METER TO THROTTLE BODY COUPLER & CLAMPS, AND AIR FILTER (AS SHOWN--CHOOSE RED OR BLUE). A 5 PSI BOOST GAUGE COMES WITH THE KIT AS WELL. INSTALLATION IS 8-10 HRS FOR THE FIRST TIMER.
COMES WITH 1-YEAR LIMITED WARRANTY--COVERS DEFECTIVE PARTS ONLY.

ADDITIONAL REQUIRED PARTS:

FUEL CONTROL OF SOME TYPE--
1999 CARS--FUEL SETUP 1, 2, OR 3.
2000+ CARS--FUEL SETUP 2 OR 3
1--FMU (12:1 ON EBAY FOR $90)
2--ADDITIONAL INJECTOR AND CONTROLLER
3--LARGER INJECTORS AND CONTROLLER.

SUGGESTED ADDITIONAL ACCESSORIES:
FUEL PUMP UPGRADE
AIR-FUEL METER
HEADERS & EXHAUST
3.0 SWAP
OIL COOLER FOR AUTO TRANNY
FRONT MOUNT INTERCOOLER (LOOKS COOL & ADDS A FEW HP AT 5 PSI. BIGGER GAINS AT *HIGHER BOOST)
BIG BORE T-BODY

*HIGHER BOOST--UP TO 12 PSI--IS POSSIBLE WITH UPGRADED CERAMIC CARTRIDGE BEARINGS, KEVLAR BELT, AND 6-GROOVE CUSTOM PULLEY (WILL REQUIRE SLIGHT MODS WITH SLEDGE TO FRAME RAILS FOR CLEARANCE) NOT RECOMMENDED OVER 6 PSI FOR STOCK ENGINE. LARGER INJECTORS A MUST FOR HIGHER BOOST. NO WARRANTY ON MODIFIED HEAD UNITS OR BELT DRIVE.


*Note: I will be updating this post with Contour specific information ASAP.


*Note to Mods/Admins: If anyhting is wrong with this post please PM me and I will change it ASAP. I am new here so I might not be fimiliar with all of the rules

Joined: Mar 2004
Posts: 133
P
CEG\'er
Offline
CEG\'er
P
Joined: Mar 2004
Posts: 133
Pics dont work


ST24 Mondeo, 19's, Koni/GC coilovers, Morrette headlights, bespoke interior etc etc
Joined: Feb 2002
Posts: 1,087
B
Hard-core CEG\'er
Offline
Hard-core CEG\'er
B
Joined: Feb 2002
Posts: 1,087
Click the link to NECO and try clicking on the picture links there. It worked for me.


Matt 2002 Subaru Impreza WRX (WRB Stage 4+) Old Rides: 1999 Sil-Fro SVT Contour 3.0L with goodies (Totalled 6/21/06) 1988 Bronco II (Sold) You know you launch hard when you beat oncoming traffic through their own crosswalk lines.
Joined: Aug 2000
Posts: 674
D
Veteran CEG\'er
Offline
Veteran CEG\'er
D
Joined: Aug 2000
Posts: 674
Very interesting, never thought about putting it over on that side.


Originally posted by Davo:
Good work, Dave. You're definitely the #1 interior guy around these parts; always innovating.


Redline Goods ShifterBoots:5% Discount
Joined: Apr 2004
Posts: 338
R
CEG\'er
Offline
CEG\'er
R
Joined: Apr 2004
Posts: 338
Originally posted by dpa43:
Very interesting, never thought about putting it over on that side.




I've looked over most of the cougar post as it has been being updated... looks like it could have potential for a good alternative to the not so favored Vortech

So far there have been concerns about the bend at the TB.



CSVT#1321/2150 Born 1/6/2000 It's just a Contour.. Before Dyno: 178.9whp w/2.5L 94 Probe 4cyl/150k KYB struts, Magnaflow Polished SS muffler (Daily Driver)
Joined: Jun 2006
Posts: 9
R
Newbie
OP Offline
Newbie
R
Joined: Jun 2006
Posts: 9
Originally posted by Redlineracer12:
Originally posted by dpa43:
Very interesting, never thought about putting it over on that side.




I've looked over most of the cougar post as it has been being updated... looks like it could have potential for a good alternative to the not so favored Vortech

So far there have been concerns about the bend at the TB.






The kits for the first group buy over on NECO are arriving at the buyers doorsteps this week and last week.. Once they are installed I will have more information..

Also I am updating the links to pics, the neco forum software messed up the links

Joined: Jun 2006
Posts: 9
R
Newbie
OP Offline
Newbie
R
Joined: Jun 2006
Posts: 9

Joined: Sep 2004
Posts: 1,978
P
Hard-core CEG\'er
Offline
Hard-core CEG\'er
P
Joined: Sep 2004
Posts: 1,978
Do you happen to know if Mr. Knight every plans on selling just the bracket and charger? Id be interested in picking those up eventually but i'd like to do some different things with the piping....


Alex '99 SVT Contour -=|WANTED: Vortech, working or not |=-
Joined: Jun 2006
Posts: 9
R
Newbie
OP Offline
Newbie
R
Joined: Jun 2006
Posts: 9
Sorry to say I doubt he will be

Joined: May 2000
Posts: 7,012
M
Hard-core CEG'er
Offline
Hard-core CEG'er
M
Joined: May 2000
Posts: 7,012
wow.


Oo (xxx)oO o xxxxxxxx o
Page 1 of 6 1 2 3 4 5 6

Moderated by  1314_dup1 

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5