Contour Enthusiasts Group Archives Forums Modifications General Mods Hmm...? Which mods?

I used the A4 lights, you have to modify the hole in the fender to make them fit.

If you look at the back side of the lights, it is clear they will not fit in the penny sized hole the lights have a rectangular extrusion on the back that won�t allow it to be flush mounted with out making the hole in the fender larger.

I have installed these on my svt and had to modify the circle hole to fit the rectangular extrusion.
older A4 side marker
These I believe are the older style A4 lights that will fit in the hole is modification to the light itself and not the fender.

So you cut a rectangle in your fender?

Yes, look at the picture. Have you seen the hole behind the badge? Its a small circular hole that�s size of the circle where the light plugs into on the back of the A4 lights (in the above pic). If you want them flush mounted then you will need to either cut the light down, or make the hole in you fender fit the light.

If you cut the light down your doing to cut the backside of the light away and the light bulb will have nothing to reflect on.


Or just buy lights that will fit with out modification, but I liked the look or the clear A4 lights.

I used these...small but bright. I got clear w/ amber led's:


The hole size is 11/16", just under an inch & it took a wee bit of grinding from the die-grinder to open them up...not much at all.

A4

Jetta


Are there any differences between these at all?

Try this

Here is the How to for the Audi side markers that fit without modifying your fender.