Contour Enthusiasts Group Archives Forums Modifications Zetec Maintenance Low speed fan problem

Print Thread

Low speed fan problem #1574153 05/20/06 09:06 PM
Joined: Jul 2005 Posts: 16 T twocontours OP New CEG\'er
OP twocontours New CEG\'er T Joined: Jul 2005 Posts: 16	My 95 contour is running hot. Found out the low speed fan is out. Found a resistor plug between the harness and the fan assembly (single fan). Three pins on the harness side two on the fan side. Outside pins show continuity, center pin no connection at all. Looks like blown resistor/fuseable link. Is this a recall mod or part of the original design. The ford dealorship doesn't show it in the parts book.

Re: Low speed fan problem #1574154 05/20/06 10:14 PM
Joined: Sep 2002 Posts: 1,788 St. Louis, MO P projectSHO89_dup1 Hard-core CEG\'er
projectSHO89_dup1 Hard-core CEG\'er P Joined: Sep 2002 Posts: 1,788 St. Louis, MO	Failure of the low speed resistor is really common. It's not an issue with any recalls. The dealer should be able to get the OEM replacement part. Steve 98 Contour SE Sport 2.5 Duratec ATX The wifey's car 89 Taurus SHO - 246K miles 94 SHO ATX - 190K 1997 F-150 5.4L ATX - The Workhorse 150K. ANY THREAD WITH "OMG" or "WTF" ETC IN THE TITLE WILL BE IGNORED!

Link Copied to Clipboard