Previous Thread
Next Thread
Print Thread
Joined: Dec 2004
Posts: 508
J
jd2-98s Offline OP
Veteran CEG\'er
OP Offline
Veteran CEG\'er
J
Joined: Dec 2004
Posts: 508
I did a battery relocation. I'm running a 4ga to the alt and starter, and then 2 8ga to the 4 12ga wires. I wanted to ask would a 100amp fuse hold on the alt/starter feed, there is no other circuit on this feed.. I have a 150 circuit breaker but its 42volts so will not trip (tested already) in a 12volts system (duh) so was just thinking 80-100amp fuse... I wana say the alt is a 80amp...


JD a.k.a Fingers "Don't Panic" '98 Contour GL 2.0L VCT ATX 88k '98 Contour LX 2.5L MTX 120k Street racing can kill just less of a chance with a 2.0
Joined: Sep 2004
Posts: 979
K
Veteran CEG\'er
Offline
Veteran CEG\'er
K
Joined: Sep 2004
Posts: 979
IIRC the Alternator is 130 amps so you need a bigger fuse. Knu Koncepts talked about it earlier. Maybe check the Audio fourms.


My ride(Cardomain link) : '95 Contour 16V Zetec DOHC, Teal , ATX Born on Sep. 4, 1995 86+ miles *LEDs mods are on their way!*
Joined: Dec 2004
Posts: 595
M
Veteran CEG\'er
Offline
Veteran CEG\'er
M
Joined: Dec 2004
Posts: 595
Originally posted by Kerry2Kool4U:
IIRC the Alternator is 130 amps so you need a bigger fuse. Knu Koncepts talked about it earlier. Maybe check the Audio fourms.




Get a circuit breaker.


Black 1998.5 3L Oval Port Full HMS Transmission Lots of other stuff Ressurected 06/14/06

Moderated by  GTO Pete 

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5