|
|
|
|
Joined: Mar 2004
Posts: 4,141
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Mar 2004
Posts: 4,141 |
Originally posted by fastcougar:
It's crap ... poly fill the roll resistor instead. I have seen some 85A shore hardness epoxy filler if 94A is too stiff for your liking.
85 isn't much softer....i did a set of forward LCA's in 85 and it still seemed prety stiff.
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
|
|
|
|
|
Joined: Aug 2002
Posts: 3,732
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Aug 2002
Posts: 3,732 |
Originally posted by pole120:
Originally posted by fastcougar:
It's crap ... poly fill the roll resistor instead. I have seen some 85A shore hardness epoxy filler if 94A is too stiff for your liking.
85 isn't much softer....i did a set of forward LCA's in 85 and it still seemed prety stiff.
how did the urethane control arms turn out?
ive been contemplating taht for a while now...
Russell
Oval Port 3L Nearly Done
MTX75 w/ Homebrew Zetec FD and Torsen Complete
|
|
|
|
|
Joined: Mar 2004
Posts: 4,141
Hard-core CEG\'er
|
|
Hard-core CEG\'er
Joined: Mar 2004
Posts: 4,141 |
Originally posted by Russell-3L:
Originally posted by pole120:
Originally posted by fastcougar:
It's crap ... poly fill the roll resistor instead. I have seen some 85A shore hardness epoxy filler if 94A is too stiff for your liking.
85 isn't much softer....i did a set of forward LCA's in 85 and it still seemed prety stiff.
how did the urethane control arms turn out?
ive been contemplating taht for a while now...
Don't know....Stazi has them...i'm not sure if they've ever been installed.....i was going to offer the service if they proved to last and perform. The time and cost involved to produce them would be outrageous and i'm no longer persuing the idea. I would however like to know how they perform....
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
|
|
|
|
|
Joined: Sep 2002
Posts: 9,065
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Sep 2002
Posts: 9,065 |
Originally posted by pole120:
Originally posted by Russell-3L:
Originally posted by pole120:
Originally posted by fastcougar:
It's crap ... poly fill the roll resistor instead. I have seen some 85A shore hardness epoxy filler if 94A is too stiff for your liking.
85 isn't much softer....i did a set of forward LCA's in 85 and it still seemed prety stiff.
how did the urethane control arms turn out?
ive been contemplating taht for a while now...
Don't know....Stazi has them...i'm not sure if they've ever been installed.....i was going to offer the service if they proved to last and perform. The time and cost involved to produce them would be outrageous and i'm no longer persuing the idea. I would however like to know how they perform....
I've seen em, I'll get him to install them on hist car when he pulls the motor out! 
|
|
|
|
|
|
|
