|
|
|
|
Joined: Apr 2003
Posts: 58
CEG\'er
|
OP
CEG\'er
Joined: Apr 2003
Posts: 58 |
I don't have any torx sockets , so what size do I need for the rear calipers ?? Also when its very cold and or snowy my rear caliper locks up after using my E-brake . Any help would be greatly apreciated . Thanks , Jason
|
|
|
|
|
Joined: Dec 2001
Posts: 6,910
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Dec 2001
Posts: 6,910 |
put new cables on, the kit for two cables runs about $40
torx size, note sure off hand
- 95 Mystique LS - Zetec/5spd
- 99 Contour SeVT Sport - Duratec/5spd
Official NE-CEG Contour/Mustang Family
|
|
|
|
|
Joined: Aug 2001
Posts: 5,810
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Aug 2001
Posts: 5,810 |
I think the rear uses a T-50 torx for the bolts.
Former owner of '99 CSVT - Silver #222/2760
356/334 wHP/TQ at 10psi on pump gas!
See My Mods
'05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red
'06 Mazda5 Touring, 5spd,MTX, Black
|
|
|
|
|
Joined: Jul 2001
Posts: 7,100
Addicted CEG\'er
|
|
Addicted CEG\'er
Joined: Jul 2001
Posts: 7,100 |
The rear is "typically" a T-50..
there are reports of:
no torx at all, a metric bolt instead;
a T-45;
and a size "bigger than a t-50 but barely.. it was loose with a t-50"
Not exactly accurate, but shows the deviances in the production.
'99 CSVT - Silver #222/276
In a constant state of blow-off euphoria.
Originally posted by Kremitthefrog:
I like to wear dresses and use binoculars to watch grandmas across the street.
|
|
|
|
|
Joined: Sep 2000
Posts: 4,693
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Sep 2000
Posts: 4,693 |
Mine works best with a T-47.
Jim Johnson
98 SVT
03 Escape Limited
|
|
|
|
|
Joined: Aug 2004
Posts: 6,791
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Aug 2004
Posts: 6,791 |
|
|
|
|
|
Joined: Jan 2004
Posts: 218
CEG\'er
|
|
CEG\'er
Joined: Jan 2004
Posts: 218 |
Mine was loose with a t50.
Last edited by tsSVT; 02/02/06 07:11 PM.
2000 Silver SVT
|
|
|
|
|
|
|
