|
|
|
|
Joined: Aug 2001
Posts: 5,810
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Aug 2001
Posts: 5,810 |
What do you mean challenging current information and us jumping up and down?
I don't think anyone has professed to know what the new taurus injectors really are. I think Todras has said that the Escape inj. are 19# and the newer Taurus are 24# but that wasn't carved in stone.
I know my Taurus injectors are 24# because I looked up the part number.
So really, until we get some serial numbers and post the list again, I don't see this as anything other than a bit of good, added information.
Former owner of '99 CSVT - Silver #222/2760
356/334 wHP/TQ at 10psi on pump gas!
See My Mods
'05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red
'06 Mazda5 Touring, 5spd,MTX, Black
|
|
|
|
|
Joined: Aug 2002
Posts: 1,210
Hard-core CEG\'er
|
|
Hard-core CEG\'er
Joined: Aug 2002
Posts: 1,210 |
I flowed the escape and taurus injectors i had and they turned out to be 19 and 24 respectively
John, if you want I can send you over my chip since I'm not driving my car and you can try it out?
Ohh and as far as I know the ford dealers don't have flow rate infos
3.0 14.392@97.237 2.302 60ft
OEM 4-bolt LCA's $105 each
Watch me go
|
|
|
|
|
Joined: Sep 2000
Posts: 9,602
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Sep 2000
Posts: 9,602 |
I'm one of the folks that has posted a few times the Ford manual stated the newer returnless 3L 4V injectors were 21lbs. This even as recently as last week or so IIRC. There was also a big post about it quite a while ago started by a NECO member. (he posted a scan from the manual but I don't know what year or model)
I've had no problems with tuning mine (from an 02 Taurus) and have my injector slopes at 24/28. My final A/F is nearly identical to what I am commanding with the fuel tables. Of course I have the cat temp switch off and a couple other "fuel" nannies.
I don't see anything wrong with running 21lb injectors on a 3L because you are never going to max their potential Normally Aspirated. However I do agree you need to know what size they are to program for them.
2000 SVT #674
13.47 @ 102 - All Motor!
It was not broke; Yet I fixed it anyway.
|
|
|
|
|
Joined: Dec 2001
Posts: 1,943
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Dec 2001
Posts: 1,943 |
well since i have my fuel rail off for leaking issues and since i also have tuning issues with adc, ill post my PN's here:
the ones i have currently on my 3L:
YL8E-B2A
and another set i had on a spare motor:
YF1E-A2C
so if anyone knows what size those guys are let me know...
the 3.0L
oval port 3.0L '98 midnight blue se
|
|
|
|
|
Joined: Jul 2003
Posts: 375
CEG\'er
|
|
CEG\'er
Joined: Jul 2003
Posts: 375 |
What year and model did the engines come from?
96 LX 3.0L MTX - Black/Tan
K&N; 12lb F/W & uprated clutch
2.5" Pipe; SVT bits; Mystery Mod; Pull-tie Mod;
UN-tuned Mod; 3rd Gear Synro-Crunch Mod
280K on the Shell, and 40ish on the Motor... 1/4 mile??
Yeah, it's a fun daily driver...
|
|
|
|
|
Joined: Dec 2001
Posts: 1,943
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Dec 2001
Posts: 1,943 |
Originally posted by 5speed3.0SE�®:
well since i have my fuel rail off for leaking issues and since i also have tuning issues with adc, ill post my PN's here:
the ones i have currently on my 3L (01' taurus):
YL8E-B2A
and another set i had on a spare motor (00' taurus motor):
YF1E-A2C
so if anyone knows what size those guys are let me know...
corrected*
the 3.0L
oval port 3.0L '98 midnight blue se
|
|
|
|
|
Joined: Aug 2002
Posts: 1,210
Hard-core CEG\'er
|
|
Hard-core CEG\'er
Joined: Aug 2002
Posts: 1,210 |
This is another one I know
YL8E-C7B (2004 Escape) 19 lb/hr
3.0 14.392@97.237 2.302 60ft
OEM 4-bolt LCA's $105 each
Watch me go
|
|
|
|
|
Joined: Dec 2001
Posts: 1,943
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Dec 2001
Posts: 1,943 |
Originally posted by 5speed3.0SE�®:
well since i have my fuel rail off for leaking issues and since i also have tuning issues with adc, ill post my PN's here:
the ones i have currently on my 3L (01' taurus):
YL8E-B2A
and another set i had on a spare motor (00' taurus motor):
YF1E-A2C
so if anyone knows what size those guys are let me know...
i just had these two different injectors flowed....
YL8E-B2A
these flowed 19 lb/hr
YF1E-A2C
these flowed 25 lb/hr
hth in getting a list compiled...
the 3.0L
oval port 3.0L '98 midnight blue se
|
|
|
|
|
Joined: Aug 2002
Posts: 310
CEG\'er
|
|
CEG\'er
Joined: Aug 2002
Posts: 310 |
Originally posted by 5speed3.0SE�®:
just had these two different injectors flowed....
YL8E-B2A
these flowed 19 lb/hr
YF1E-A2C
these flowed 25 lb/hr
These were flowed at 45 PSI for anyone who cares.
I'll put holes in him!!
|
|
|
|
|
Joined: Aug 2001
Posts: 5,810
Hard-core CEG'er
|
|
Hard-core CEG'er
Joined: Aug 2001
Posts: 5,810 |
Former owner of '99 CSVT - Silver #222/2760
356/334 wHP/TQ at 10psi on pump gas!
See My Mods
'05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red
'06 Mazda5 Touring, 5spd,MTX, Black
|
|
|
|
|
|
|
