|
Joined: Feb 2003
Posts: 1,071
Hard-core CEG\'er
|
OP
Hard-core CEG\'er
Joined: Feb 2003
Posts: 1,071 |
I have a question. I just swapped out my summer tires and noticed that the front tires were worn very badly on the inside edge, I almost thought that maybe they were rubbing on the strut but they aren't... What would cause the wear like that? ANyone know? I'm so p1ssed right now! BTW, they are Yokohama ES100's 17" if that matters.
00SEMTXMeshgrill,KKM&K&N,Fogsmodded,17"MotegiFF5's,SilverELgauges,BlueLEDinterior,Knaubered Trubendzw/magnaflowhttp://www.sl33stak.com
FSVT Smart pump
|
|
|
|
Joined: Jan 2005
Posts: 404
CEG\'er
|
CEG\'er
Joined: Jan 2005
Posts: 404 |
|
|
|
|
Joined: Sep 2000
Posts: 4,693
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Sep 2000
Posts: 4,693 |
A common problem is too much negative caster on the front wheels. That can cause inside edge wear on the front tires. On my car it made about a one inch stripe that was worn while the rest of the tire still had a lot of material remaining.
Those that did the alignment on it kept claiming that it was from too much toe out.
Problem finally fully resolved from installing camber kits and reducing negative camber.
If you have some alignment readings (recent or from the past), please post them so we can make a better assessment.
Jim Johnson
98 SVT
03 Escape Limited
|
|
|
|
Joined: Feb 2003
Posts: 1,071
Hard-core CEG\'er
|
OP
Hard-core CEG\'er
Joined: Feb 2003
Posts: 1,071 |
Thanks Jim,
I haven't had an alignment since i got the rims (is that bad?) I'll llok into the camber kit in the spring, since I'm gonna do the suspension (BAT kit), but mine do have about a 1" wide are of wear as well.
00SEMTXMeshgrill,KKM&K&N,Fogsmodded,17"MotegiFF5's,SilverELgauges,BlueLEDinterior,Knaubered Trubendzw/magnaflowhttp://www.sl33stak.com
FSVT Smart pump
|
|
|
|
Joined: Aug 2004
Posts: 2,659
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Aug 2004
Posts: 2,659 |
Originally posted by Sl33stak: Thanks Jim,
I haven't had an alignment since i got the rims (is that bad?) I'll llok into the camber kit in the spring, since I'm gonna do the suspension (BAT kit), but mine do have about a 1" wide are of wear as well.
Yes you should get your alingment checked everysummer. its not that expensive. Trust me I would get my alingment checked once a year, its cheaper than buying new tires. Plus if you have correct alightment its less stress on the car and better gas mileage.
"Do what you like, Because you have to drive it!"-Me
99 Contour LX
95 Mustang GT Convertible
97 Z24 Cavalier
|
|
|
|
Joined: Sep 2000
Posts: 4,693
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Sep 2000
Posts: 4,693 |
Originally posted by stocksvtcontour: Within my mechanical knowledege I agree under inflation. http://www.goodyeartires.com/kyt/maintaningATire/index.html#2 Joe
You need to read your link a little better. Underinflation will not cause edge wear on one side only. It may be a contributing factor, but it won't be the main factor. Look a little lower on the page on your link.
Jim Johnson
98 SVT
03 Escape Limited
|
|
|
|
Joined: Nov 2005
Posts: 217
CEG\'er
|
CEG\'er
Joined: Nov 2005
Posts: 217 |
Sorry I read the orginal post incorrectly. I thought he said the outside edges not one. sorry for the confusion. joe
2000 svt contour
1996 oldsmobile eighty-eight
|
|
|
|
Joined: Sep 2000
Posts: 4,693
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Sep 2000
Posts: 4,693 |
That's a good link, by the way.
Jim Johnson
98 SVT
03 Escape Limited
|
|
|
|
Joined: Nov 2005
Posts: 217
CEG\'er
|
CEG\'er
Joined: Nov 2005
Posts: 217 |
thank you joe
2000 svt contour
1996 oldsmobile eighty-eight
|
|
|
|
|