Register Log In

Contour Enthusiasts Group Archives Forums Modifications Duratec Performance SVT cams

Print Thread

Page 2 of 2

1

2

Re: SVT cams #1346106 07/29/05 04:38 PM
Joined: Nov 2004 Posts: 63 Tempe Arizona USA S SonofSHO CEG\'er
SonofSHO CEG\'er S Joined: Nov 2004 Posts: 63 Tempe Arizona USA	Originally posted by windrain: I'm about to fit SVT cams to a non SVT which has ported heads, Extrude honed UIM and SVT TB. I currently have 160wlbs torque at 2700 rpm, obviously I'll have more power higher up with SVT cams but will I have less torque at 2700 rpm with SVT cams? My guess is that you will move the torqe curve up. Keep in mind that the SVT ususlly has much higher compression, which gives a nice pop to the low RPM torque. Carl 2000 Black CSVT #415 89 SHO (RIP) 75 280z

Re: SVT cams #1346107 07/29/05 11:33 PM
Joined: Aug 2001 Posts: 5,810 Ozark, AL W warmonger_dup1 Hard-core CEG'er
warmonger_dup1 Hard-core CEG'er W Joined: Aug 2001 Posts: 5,810 Ozark, AL	the .3 compression points are pretty low actually. The magic is in the cams, not much from the compression. The headers combined with the headers will give you a big low end torque boost and the cams will take care of the top end. The combination is awesome. As long as you keep using a muffler, resonator and catalytic converter...even straight through designs, it will not be too loud. It will sound better, a bit more aggressive. Former owner of '99 CSVT - Silver #222/2760 356/334 wHP/TQ at 10psi on pump gas! See My Mods '05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red '06 Mazda5 Touring, 5spd,MTX, Black

Re: SVT cams #1346108 07/31/05 11:01 PM
Joined: Feb 2004 Posts: 48 W windrain OP New CEG\'er
OP windrain New CEG\'er W Joined: Feb 2004 Posts: 48	Would a rechip change the compression or is that mechanical?

Re: SVT cams #1346109 08/01/05 03:48 AM
Joined: Sep 2000 Posts: 4,693 Thousand Oaks, California, USA B Big Jim_dup1 Hard-core CEG'er
Big Jim_dup1 Hard-core CEG'er B Joined: Sep 2000 Posts: 4,693 Thousand Oaks, California, USA	It's mechanical. Jim Johnson 98 SVT 03 Escape Limited

Re: SVT cams #1346110 08/02/05 12:06 AM
Joined: Feb 2005 Posts: 1,572 P P�?�?�WD�?�?��?®C�?�?�?�?TM�?�?��?�? Hard-core CEG\'er
P�?�?�WD�?�?��?®C�?�?�?�?TM�?�?��?�? Hard-core CEG\'er P Joined: Feb 2005 Posts: 1,572	Originally posted by todras: W3rd. Don't mind todras he's a fool . Check me out for awsome powder coating deals www.powdercoatingworld.com People shouldn't slam each other when posting, If you cant say something good to say then just hit the back arrow.

Page 2 of 2

1

2

Moderated by GTO Pete

Link Copied to Clipboard

Powered by UBB.threads™ PHP Forum Software 7.7.5