Contour Enthusiasts Group Archives
Posted By: 99SVT_dup1 Fill to spill?? - 04/27/06 12:53 AM
Three quarts in and no spilling out the fill plug?? Weird?
Posted By: CSVT#49 Re: Fill to spill?? - 04/27/06 01:05 AM
I had the same thing happen to me.
Posted By: 99SVT_dup1 Re: Fill to spill?? - 04/27/06 01:13 AM
So did u just go with it or what?
Posted By: CSVT#49 Re: Fill to spill?? - 04/27/06 01:38 AM
Yes. I haven't had any problems.

I had a post about this not to long ago. Might want to search to see if you can find it. Just do a search for "Torco" you should be able to find it.
Posted By: CSVT#49 Re: Fill to spill?? - 04/27/06 01:38 AM
Yes. I haven't had any problems.

I had a post about this not to long ago. Might want to search to see if you can find it. Just do a search for "Torco" you should be able to find it.


Ah well I just did it for you:

http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=tranny&Number=1140767&page=&view=&sb=5&o=&fpart=1&vc=1

It's towards the end on page 2 (well for me anyway)
Posted By: Icefury_dup1 Re: Fill to spill?? - 04/27/06 01:43 AM
If the car is jacked up, even a little, the tranny will take in more fluid then normal due to the incline. Just an FYI
Posted By: KingpinSVT Re: Fill to spill?? - 04/27/06 06:07 AM
The other day mine took a full 3 quarts. I used 2 jacks in the rear with jackstands and used a level to make sure the car was flat. Once I got it perfect, some spilled out.
Posted By: Stazi Re: Fill to spill?? - 04/27/06 12:46 PM
Originally posted by 99SVT:
So did u just go with it or what?



Yes.
© CEG Archives