Modded fuel rail pics - CEG Archives

Contour Enthusiasts Group Archives

Never got a chance to post these up earlier and since the engine was out decided to take a couple of pics

I want THAT NOW!!!

Seriously whoever did that, can they make another one?!!?!?!

wow, nicely done

Great job ... looks OEM!

Now you just need to angle the fuel pressure hook up toward the front of the engine.

Also how are you going to get the injectors clips on. It looks like you don't have enough room for them. I just finished one for another 3L Contour this past week.

I just wondering why you guys do this vs. pulling the fuel rail from the engine that's being pulled ... am I missing something?

The injector clips go on just fine and I havent had an issue with the fpr yet

I might be able to get some more made if any one is interested

Quote:

I just wondering why you guys do this vs. pulling the fuel rail from the engine that's being pulled ... am I missing something?

The injectors on the oval port engines are in different spots than on the split port engines so you can't interchange the fuel rails. That's why we need to fill the old injector spots and cut new ones when we are porting the oval port heads.

Quote:

I havent had an issue with the fpr yet

I was talking about the fuel line pressure hook up on the other line. It's really hard to get at if it's aimed the other way. I guess you'll only use it if you need to trouble shoot something though.

ohhhh the hookup

Thats where it was in the escape fuel rail so I didnt even touch that, but I guess it might be easier if it was pointed the other way

please pardon my ignorance, but this is for a hybrid 3 point ohh?

ttt

Nope not for a hybrid, if you are using the 2.5 intake setup you use the 2.5 fuel rail ur car came with and if you use the 3L intakes then u use the 3L fuel rail and depending on if your car is return/returnless...
My car is retrun so I had to fabricate a return line to the 3L escape fuel rail