I'm getting a set of camber plates but they don't have the instructions. Does anyone have them or explain how to adjust them?

Thanks!

Nate

It's pretty simple - just put a 3/8" socket extension in the hole and turn. Obviously the car must be jacked up to get the weight off it first.

They are also available on the maker's web site, Specialty Products. Look up the part number by application and you can find the instructions for both installation and adjustment as well.

Nate after you get the suspension installed I can tell you where I had it on my car. I remember the markings.

Aaron

Tolerances vary a lot car-to-car, and ride height makes a big difference too. I'd never set an alignment for the street based on anything but measurements. What is 0.5* negative camber on one car might be 2* negative on another. You need an alignment for toe anyway.