ok the price through a dealership is $85 for 4 short bolts/nuts and 4 long bolts/nuts...this is kinda insane considering I could use that money afterwards for an allignment!! is this what you guys paid too for new bolts? or do I have an alternative? Im not reusing the ones I have, those are like completely gone..suggestions?
Get one of each for reference sake(long and short bolts) and go to a bolt/nut supply specialty shop. Get atleast grade 8 hardware or whatever the OEM stuff is. I bet you can get what you need for about $10 or less.
Call bill and get them all from him. Don't screw around with inferior hardware in this app. By the time you find the right bolt from Fastenal or McMaster-Carr, get it shipped, cut the extra threads, etc., it's probably not worth the hassle.
Even from Bill they are not enexpensive. As I recall one of the 12mm diameter bolts was about 14 bucks
I think the total was somewhere near 50 bucks for the nuts and bolts I ordered.
Shoulda just bought them from Mcmaster.com
I should have clarified that I didn't order all eight bolts. I just wanted few of each in case some were stripped or damaged durring removale.
Team Ford price:
Small = $9.46
Large = $2.59
Nut = $4.28
anyone have the part numbers for the LCA bolts?
i have the 4-bolt LCAs.
sweet.
and now being as dumb as i am, i forgot to ask about the nuts.
do you know the nut part number too?
are the nuts lock nuts?
the nuts are lock nuts, they had the little rubber thing towards the end of the nut indicating that is is a lock nut..
Mike I may have few new bolts that I didn use along with nuts that I didnt need since Bill sent me the wrong ones, all big ones..I'll bring them over to you..
the description of the bolts describes 2 different sizes, M12 and M10.
Haroon that would be great if you could bring me the bolts, it would be less for me to order.