Contour Enthusiasts Group Archives
What does a bone stock svt run on th 1/8 mile?
be happy for a 10.xx, if you launch well.. (NO WHEEL HOP!!!!)

Ray
Originally posted by CSVT EDDIE:
What does a bone stock svt run on th 1/8 mile?




i made at sea level 10.40 my best run
Originally posted by CSVT EDDIE:
What does a bone stock svt run on th 1/8 mile?




my best was a 9.84
I ran a 10.1 on my first and only time at the 1/8th track.
i ran a 10.30 launched at 2800rpm and 10.55 launched at 3300 rpm sea level
i am a little happy with the results

the sunday night i was in my local 1/8 mile track and have a few pass made it my best was


9.20 at 80 mph

and the worst was

10.10 around 75 mph

all the time i made with a semi slicks tires and a little burn and launched at 2100 rpm and red line shift of 7500
Is the stock SVT redline set at 7500!
Originally posted by MapOfTaziFoShoĆ¢ā??Ā¢:
Is the stock SVT redline set at 7500!





no, nor does the svt have a 3L in it.
Originally posted by MapOfTaziFoShoĆ¢ā??Ā¢:
Is the stock SVT redline set at 7500!





noup

i have a 3.0 block with svt heads and cams
superchip
decuted cats
optimized y pipe
and new high performance mufflers

the pro-m maf 75mm is malfunctioning buth i have too i need to reprogram
I'd get rid of that POS Pro-M MAF. You'd be better off without it.

Mark
Originally posted by Y2KSVT:
I'd get rid of that POS Pro-M MAF. You'd be better off without it.

Mark




word. The PRO-M is junk. Its either hit or miss.
Originally posted by RRT_SVT:
Originally posted by MapOfTaziFoShoĆ¢ā??Ā¢:
Is the stock SVT redline set at 7500!





noup

i have a 3.0 block with svt heads and cams
superchip
decuted cats
optimized y pipe
and new high performance mufflers

the pro-m maf 75mm is malfunctioning buth i have too i need to reprogram





I'm gonna raise my rev limiter today.
Originally posted by beyondloadedSE:
Originally posted by Y2KSVT:
I'd get rid of that POS Pro-M MAF. You'd be better off without it.

Mark




word. The PRO-M is junk. Its either hit or miss.





then is better a xcal for my setup?????
Originally posted by beyondloadedSE:
Originally posted by Y2KSVT:
I'd get rid of that POS Pro-M MAF. You'd be better off without it.

Mark




word. The PRO-M is junk. Its either hit or miss.


+1
Whose number above is made by a true bone stock SVT?
© CEG Archives