any ideas for car stuff...

how about some seat covers that are leather and look like svt seats

another group buy in some nice rims and tires would be nice!

I'd really like to see someone fabricate some mondeo/morette style headlights that will plug&play on a contour. Of course that's probably never gonna happen but I can dream right?

GB on those dask kits ,, like that you stick on that are CF, wood, or aluminum...

Originally posted by Kremithefrog:
GB on those dask kits ,, like that you stick on that are CF, wood, or aluminum...

Yeah a dash kit would be nice!!!

Originally posted by Kremithefrog:
GB on those dask kits ,, like that you stick on that are CF, wood, or aluminum...

This might be very possible. I know a guy that does great carbon fibre work. The only thing is that this would not be a stick on I would have it made so that it replaces your exsiting dash pieces. I'm in the middle of movign right now so I won't be able to talk to the guy until next week. This also has great prices he told my friend that he would make me a carbon fibre hood for around $500 Canadian which is awesome becuse most carbon fibre hoods cost $1500 Canadian.

Aaron

what does everyone think about euro style tail lights for both contours and mystiques? you know something to replace the single red piece on the trunks or just tail lights. and we could always go for some bodykits. just tossing out ideas.

rims & tires
bolt on headers for zetecs
zetec exhaust systems
body kits
cold air intake
projector lights
vented hood

just some things I'd like...

i would be in for either an CAI system or Euro tail lights

Originally posted by Jholloway:
what does everyone think about euro style tail lights for both contours and mystiques? you know something to replace the single red piece on the trunks or just tail lights. and we could always go for some bodykits. just tossing out ideas.

Euro tails/ altezza are ugly!! get some ALL clear talk lights or smoked.

euros would be cool, how about a carbon fibre mondeo hood for post 98

Originally posted by drerok:

Euro tails/ altezza are ugly!! get some ALL clear talk lights or smoked.

I thought "Altezza/Euro" style WAS clear. Smoked can be sprayed on. Clear lens with body matched reflector sounds cool.

18" OZ superleggra's for like 500 a set!

that would be the group buy to top all group buys!!!!!!!!!

Originally posted by csc99svt:
18" OZ superleggra's for like 500 a set!

that would be the group buy to top all group buys!!!!!!!!!

i would worship and give all of my plundered booty for 5 years to any ninja slick enough to pull this off

i'd like morette style lamps, or hightowers rear lights to come to production

Originally posted by freakshow:
I'd really like to see someone fabricate some mondeo/morette style headlights that will plug&play on a contour. Of course that's probably never gonna happen but I can dream right?

Hell yea so would i those are sweet!!!!

Originally posted by drerok:

Euro tails/ altezza are ugly!! get some ALL clear talk lights or smoked.

Carbon Fiber Taillight conversion would be nice or smoked!!!!

Originally posted by csc99svt:
18" OZ superleggra's for like 500 a set!

that would be the group buy to top all group buys!!!!!!!!!

Oz Superleggras would be the shiznit for sure

how many peps do you think you could get together?

i just checked a couple of places and they said they are being discontinued.

How about a borla or bassani cat back? Did they discontinue the OZ F1 cups? Those are sweet as well.

Any custom tail light would work i just want to get rid of my stock crap. how about some custom floormats made to order? plug and play mondeos would be bada$$!

-Pre-made Rear Armrests that have integrated cupholders with the cirlce/square compatability of drinks.

-Rear door pockets.

-A cup holder that pops out below the rear centre console
one.

-Some thing that make the deadweight Trunk to pop up at least 6 inches.

Who sits in the rear seat? I don't even have a rear seat but I rode back they're the other day because I had somebody else driving and a girl in the back.

And the trunk thing, I think you can get stronger trunk struts and set them up to have a good bit of pressure to pop the trunk up.

Lets make this photochop a REALITY!

Only the hood is actually curved like that, using jlab's mystique I had to curve the lebra too. All we would need is to get a hood made like that, and use mystique lights. Then you can have mesh in there, or have it black inside there with the svt logo sticking out like here.

I dont know about you guys, but even without a post98 contique, im getting quite sick of the damn ford oval look. BREAK FREE FROM THE OVAL!

Originally posted by Kremithefrog:
Complete turbo kit for zetecs for under $2k. Or do you mean something that actually could be done?

yeah right,,,

How about some billet aluminum shift knobs that have the oval CEG logo?? That would be sick. . . .

Where you get that grill?

It's a Photochop. There is no grill.

looks pretty sweet.

Originally posted by Kingpin:
How about some billet aluminum shift knobs that have the oval CEG logo?? That would be sick. . . .

SWEET
Or even Leather ones for cheaper.

Originally posted by Cris'pus:

Originally posted by Kingpin:
How about some billet aluminum shift knobs that have the oval CEG logo?? That would be sick. . . .

SWEET
Or even Leather ones for cheaper.

Yeah! I'm up for either kind!

custom hood/grille!! come on!

shifter knob: fairly cheap, probably not too hard to make, and it would be IMHO the coolest thing ever, seriously

Shifter knobs are already made and cheap enough to not need GBs.

Some CEG Floor mats would rule. They would have to be made like the factory with a hole for the little hook.

Originally posted by lithium398:
custom hood/grille!! come on!

i talked to the guy that might be the next group buy

Originally posted by Jholloway:
what does everyone think about euro style tail lights for both contours and mystiques? you know something to replace the single red piece on the trunks or just tail lights. and we could always go for some bodykits. just tossing out ideas.

great idea, then we could put a big ass R on our back windows and no longer stand out from the millions of hondas on the road

Big Rs!!! I take a set.

how about a new set of pre98 headlights?

I've heard it talked about before but Mirko-Esque lower bumber spoilers for non-SVT's
Not necessarily ones that jut out, but ones that lower the look of the bumper.
Like

Not to be a Honda, but to have more custom looks and since it would be a bolt-on/glue on peice; would cost relatively cheap.

this is for SVT4B

Damn dude you need to pull that big a$$ stick out of your a$$! The way i see it, clear lights are no more ricy then air intakes, painting interiors, adding neons, and bodykits. All of that is whats called customizing. now domestics don't have a huge after market so thats why you see a lot of imports. also imports tend to be cheaper. so the way i see if i had clear lights i would stand out just cause most domestic cars have no after market and you can't find them clear tail lights and what not.

Originally posted by 1FASTDAD:

Originally posted by lithium398:
custom hood/grille!! come on!

i talked to the guy that might be the next group buy

Well I really hope people are up for it, because I dont have a post-98... but now im starting to wish i do. BAH!

how about no....altezzas = gay, period. no ifs ands or buts about it sorry. yeah someone had the best idea on here...morrette headlights, that would be AMAZING. wow