I hava a good friend at a Ford dealership who is possibly willing to do a GB for us on the Bullitt fuel doors. We would need 10 or more to get the ball rolling. Price should be like $55. Shipping details to follow...
Post only if you are INTERESTED.
This is only an "I'm interested" count! If it takes off, I will post a new thread announcing the actual group buy. Thanks.
I'm interested
Add me to the list.
I have a few new, old stock left over from the inventory of Performance Fords which I am willing to sell at the $55 USD + shipping. There are 3 for sure, beyond that I cannot be certain.
If anyone's interested (or you do not get the 10 interested parties) PM or email me (redcoatracing@yahoo.ca). First come, first shipped.
Regualr price from Ford is almost 100 bucks.
WIsh I needed one, lol.
Originally posted by LilStrypedSVT:
Regualr price from Ford is almost 100 bucks. WIsh I needed one, lol.
I need one! Yes!
Originally posted by LilStrypedSVT:
Regualr price from Ford is almost 100 bucks. WIsh I needed one, lol.
I wish I needed an Aston Martin Vanquish........d@mn... I do need one.
link me to a picture please......
Does anyone happen to have pics. of the fuel doors that are compatible with our cars???....I'd just like to see everything there is to offer.
either way, I'm in on "A" possible group buy for the fuel door.
Thanks!!
slinger
i want one too, then powdercoat man will powdercoat it black for mine
I remember when I bought mine the instant they came out. For a few weeks they were $30 then EVERYONE started buying them and the price went through the roof. Batards!
yeah i bet stazi, isnt that the way it always works man. but damn $55.00 aint bad either
Originally posted by Goonz SVT:
too bad us black car owners cant use it..unless that can be powdercoated
Why not? TH ebillit brished aluminum finsih looks HOT on black cars.
powdercoat man josh already said he will powdercoat them, that will look good, i am only doing that cause i have NO crome on my car at all
I am interested. Anyone have one on a T-Red Tour?
Dion does.. but I think he powder coated his bronze...
no i think dion kept his brushed, but would look good to match those wheels man
You are correct Ryan.
You're insane Goonz. The brushed door looks sick on the black cars, or any colour for that matter.
IMHO if you buy one and paint it the same colour as the car, what's the fukcen point? Just use the stock door.
i am having mine powdercoated cause i dont want any crome on mine at all. its the darth vader
Originally posted by Stazi:
You're insane Goonz. The brushed door looks sick on the black cars, or any colour for that matter.
IMHO if you buy one and paint it the same colour as the car, what's the fukcen point? Just use the stock door.
Originally posted by ryanblacksvt:
i am having mine powdercoated cause i dont want any crome on mine at all. its the darth vader
Makes no sense. I understand you want everything black, but your stock door IS black! All you're doing is adding weight.
I've contemplated getting one and painted only the door, and leaving the ring brushed aluminum.
Mark
because i like the look of the other door, a friend got a black one and paid an arm and a leg for it and it looks sooo much better than the aluminum on his back svt focus. i dont care about adding a pound since i am saving major weight with my cf hood and cf trunk lid. trust me it will look sweet powdercoated black
I still dont understand why these are popular. I mean, the whole point of a fuel door is to hide the place you put the fuel. I think it looks like a patch panel on cars. I mean, why do you want a stick out feature on your car to be a gas door. psh. But I guess, if they make it and it fits your cars, you'll buy it up...
i surely will, plus to some people they look good. maybe not to you but to others, like me
and another reason is some of the fuel doors have a lock on them so no one can mess with your fiel or break your gas door off
I'm in as long as it will bolt right up to the csvt
i beluve they do but you do have to cut the cup around the fill nozzle but thats a 5 minuite job with a dremel
Originally posted by ryanblacksvt:
i beluve they do but you do have to cut the cup around the fill nozzle but thats a 5 minuite job with a dremel
No cutting is needed at all. You simply twist off the plastic surround, and the whole piece comes out.
As of now, I am still taking interested parties. Once I get a strong showing I am going to take this thread to my friend and the GB will be on.
Thanks.
good deal well count me in for 1 deffinitly. have you thought about posting a gb intrest on the focus boards as well. i know a ton of svt focus guys and they love those. they fit thier the same as ours.
I don't post in Focus forums... Maybe someone can link this.
i will help you out and do it for ya man, cool i just pm'ed ron the site owner of focaljet to offer it to the focus peeps.
Originally posted by Stazi:
You're insane Goonz. The brushed door looks sick on the black cars, or any colour for that matter.
IMHO if you buy one and paint it the same colour as the car, what's the fukcen point? Just use the stock door.
nothin is chrome on my car..having that would be like the boldest thing on my car..if the door is powdercoated black then it'll be another fine detail that someone close up will notice..
This is a great Deal!!! I work at a Ford dealer and our Dead cost is $120 List is $172.00 Grab them while you can!
interested....
but i don't know think it'll fit my car????lol
Damn I bought mine for $70 shipped.
me three
my buddy expressed interest in one. so add another "possible interest"
Hey Milan,
how bout a Porsche GB?
yes as well with me a few of the focus guys want to get in on this
I'm in. My car has had no fuel door since I bought it and I've been looking for a fuel door like this everywhere and every place is either out of stock or it's on back order.
Originally posted by svt4stv:
Hey Milan,
how bout a Porsche GB?
Yeah, no kidding!
Anyhow, my friend is off for the next couple of days. But it sounds like the GB is going to be a reality very soon. I will post when it comes. Thanks guys.
How hard is that to put on? and is there drilling into the panel near the neck of tank to put it on? if it is none to hard, I might be in
Once again, the install is a 20 minute job. The old fuel door literally twists off. Then you bolt on the new. This is where it is a DIY job. Very easy.
It looks like there is a damn good interest. Can we go ahead and start the group buy?
haha sounds easy enough. I'll let you know shorty. Need to see what money I can get together (insurance due, and 2 year anniversary w/ GF
lol)
How much to ship to Canada (G1H 3V8)
Originally posted by ZeroHour:
haha sounds easy enough. I'll let you know shorty. Need to see what money I can get together (insurance due, and 2 year anniversary w/ GF lol)
Women LOVE bullit fuel doors!
im interested
lol I can't believe the grammer nazis didn't hit me for spelling shortly wrong!
I could get her one too, but I don't think it would fit a caprice would it? lol
when are these gonna be a actual gb...i have a paint scheme already planned for it thanks to the help of stryped (chad)
Originally posted by ryan(CFpimp)blacksvt:
when are these gonna be a actual gb...i have a paint scheme already planned for it thanks to the help of stryped (chad)
Damn I'm such a pimp.
I hope the GB is soon I love those things now. I should have just taken Chad's....
no i am the pimp (it says so in my name chad) but you did give me a great tip for the fuel door, what does everyone think. instead of all black i will get the center powdercoated black and the outline powdercoated silver to match my wheels. and the screws will be black
pretty similar to my idea of painting/powdercoating the actual door, and leaving the ring aluminum. If you want to P/C that also, that's up to you. I do like the idea of the black screws though.
Mark
yes it will kinda look like how i painted my rims
bump bump bump , whats up with this gb???
Originally posted by ryan(CF)blacksvt:
no i am the pimp (it says so in my name chad) but you did give me a great tip for the fuel door, what does everyone think. instead of all black i will get the center powdercoated black and the outline powdercoated silver to match my wheels. and the screws will be black
i really liked this guy's idea...
id be interested, my fuel door is broken. Its the 96 that has the latch inside, and it wont close, a piece is broken so I want to get a new one.
So is this group buy gonna happen? Cause I have the money set aside because this week is nuts at work so I'll have extra to spend
and if I would paint mine(doubtful) I would probably paint the bolts and the door to match the color of the car and leave the ring silver to accent it. That would make it painted,subtle mod that you'll never notice until you start to check the car out.
Oh unless you have a silver tour cause then that wouldn't work haha then you could paint the ring a different color! that is my .02 on the possibility of paint
I want one to! For that price i will take one.
Hell, at that price I am in as well.
That's a damn good price, all. Retail on these suckers is like $120. Too bad we just installed mine...
E1
Ok guys relax, the end of the month period in the car business is no man's land. Look for an update towards the end of next week...
So what's going on now? is this gonna happen reasonably soon? Cuz I ain't paying $175 cdn for one.
Originally posted by hdu:
count me in two
youre gonna buy two?
Originally posted by svt4stv:
Originally posted by hdu:
count me in two
youre gonna buy two?
Oh sorry my bad i mean count me in i just want one