Forums Calendar Active Threads
Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: diffuser screen on a proflow?
#983558 06/18/04 07:29 PM
Joined: Sep 2000
Posts: 9,602
KC, MO
D
DemonSVT_dup1 Offline
Hard-core CEG'er
Offline
DemonSVT_dup1
Hard-core CEG'er
D
Joined: Sep 2000
Posts: 9,602
KC, MO
Originally posted by KaptonContour:
Originally posted by DemonSVT:

That would be pretty pointless to have a restriction before the "larger" MAF.



No. see edit above.


Yes it would be pointless.

Get a different MAF adapter. One that is "not" smaller then the MAF. 'nuff said

2000 SVT #674 13.47 @ 102 - All Motor! It was not broke; Yet I fixed it anyway.
Re: diffuser screen on a proflow?
#983559 06/18/04 08:07 PM
Joined: Mar 2004
Posts: 80
K
KaptonContour Offline OP
CEG\'er
OP Offline
KaptonContour
CEG\'er
K
Joined: Mar 2004
Posts: 80
Originally posted by KaptonContour:
Besides there is no provision for it anyway between the Pro-M and a properly sized MAF adapter.

The adapter I have is smaller (inside dima.) then the MAF.
It came with my BAT filter.

So I should:
A) get new MAF adapter and filter. (Dont really want to.)
B)Chuck the screen and open up the adapter to match the MAF
C)Leave it the way it is cause the intake pipe is about the same dima. as the adapter.





So.. A, cause I dont think my BAT filter will fit on a bigger MAF adapter.
Anybody know of sources for a larger adapter/filter

I would like to go with B but since I cant realy open the inside dima. of the adapter its kind of pointless, but I really like my BAT filter and want to keep it on there.


Re: diffuser screen on a proflow?
#983560 06/18/04 08:45 PM
Joined: Mar 2004
Posts: 80
K
KaptonContour Offline OP
CEG\'er
OP Offline
KaptonContour
CEG\'er
K
Joined: Mar 2004
Posts: 80
ok I went and took some measurments of my intake parts.
these are all inside dima.'s
SVT TB UIM side 2 3/8"
BAT Pipe TB side 2 5/8"
Pro MAF downstream side 3"
Pro MAF upstream side 3 3/8"
MAF adapter 3 1/8"

So I think if I just match the adapter to the MAF to smooth out the flow it will not restrict that much cause the other side of the MAF has a smaller i.d.

Any thoughts?

oh ya BTW I'm not gona use the screen. Thank for the info on that.

Page 2 of 2 1 2

Moderated by  GTO Pete 

Link Copied to Clipboard
Forum Rules · Mark All Read Contact Us · Forum Help · Contour Enthusiasts Group Archives
Powered by UBB.threads™ PHP Forum Software 7.7.5