Originally posted by PeterM:
I used a 6ft pry bar, sat on the end, and placed the ball joint in the knuckle with no problem. I have the horzontal bushing control arms.
I did have to file the bur of the edge off the knuckle though.
Same here. I used a pry bar about 4 feet long, and sat on it while I used both hands to maneuver things into place. Before learning that trick, I spent hours and hours, using jacks, levers, compressors, and evil glares. Sitting on the pry bar was the only thing that worked with me.
95 Contour Zetec, ATX (wrecked, sitting in the barn)
95 Mystique Zetec, MTX
2000 Taurus SEL 3.0L Duratec
1994 Crown Victoria LX 4.6 V8
1993 Chevy Silverado 4.3 V6
| 
