Originally posted by kontour_sev6:
 Anyone know how to tighting down the OEM spoiler? Mine is loose on the passenger side. I popped off the rubber trunk pads but can't get a socket to fit in the plastic opening to the bolt and nut. 
Ya, there's two rivets at the points of that plastic piece, you gotta pop one off (or drill it out); at which point you can just twist that plastic piece and have full access to the nut. I would suggest some threadlocker on the screw, my passenger one was loose just like yours. Then i used a big screw in place of the rivet.
Good luck
1998 Mystique LS:
-2.5 Duratec ATX
-Vibrant White
--------------------
=Pics=
=Info=
| 
