Contour Enthusiasts Group Archives Forums General Troubleshooting Alternator Megafuse

Print Thread

Alternator Megafuse #973488 06/07/04 02:27 PM
Joined: Jun 2004 Posts: 10 B Bigjoey71 OP New CEG\'er
OP Bigjoey71 New CEG\'er B Joined: Jun 2004 Posts: 10	Hey guys, What is the best way to change the megafuse for the charging system? Is it easier to go from the top or from the bottom? What will I need to get this done? Any hints or a step by step would be great! Thanks guys, Joe PS. Its a 95 MTX Mystique with the V6 Last edited by Bigjoey71; 06/07/04 03:13 PM.

Re: Alternator Megafuse #973489 06/07/04 03:07 PM
Joined: Feb 2001 Posts: 750 Nashville, TN T tiv_dup1 Veteran CEG\'er
tiv_dup1 Veteran CEG\'er T Joined: Feb 2001 Posts: 750 Nashville, TN	What kind of car do you have ? On a 95-97 Zetec, you do it from above after removing the air intake plenum. It's in a longish rectangular black plastic case, you'll find it easily by following the thick wire from the alt. Unclip the top of the case and use a 13mm rachet wrench with a long extension to undo the bolts. Tiv

Link Copied to Clipboard