just sent the drafts for the maf adapter out to the manufacturer and the specs for the short ram. i have the bends for the cold air kits made and the carbon shafts made for me at present. i asked the manufacturer to rush on the short ram kit. both adapter and the shorty pipe make up the short ram kit. shorty pipe is 2.5 inside diameter and the maf adapter is 2 3/4 diameter. a normal cone filter should fit over the pipe just fine since the shafts will be almost .07 thick. fitment with a normal filter will leave almost .5 inch to the edge of the hood compartment. will look similar but not exactly like the cheap aluminum hard pipes u see on ebay. the shorty has bung holes (ha ha) for the two pcv and 3/4 in hoses so they can clamp on. there will be no hole for the ait sensor. you can dremel it out your self or drill a .5 inch hole and sand the slots for the tangs. i do this because i think some people might want flexibility for this sensor in placement. its not lazyness on my part but just gives the buyer more flexibility. when the prototype is complete i will post pics and will list deposit price and final price and take them. units will be shipped all at once from me to the buyer. who ever wants these needs to jump on this and ill give a window for those interested since i will not over order. yes they will be available anytime its just this makes them cheaper for the more units i can get on this first group buy. payments must be made by end of the stated window which will vary upon manufacturers (not mine) request. im looking for at least 10 units to go. if i can get this number of orders i garantee the final price of the item will be a great price and will make competators sit uneasy in their chairs. i cannot give one at this time but for a 100% carbon fiber intake system and 100% carbon maf adapter. if i hit 10 orders i will pick up the shipping costs as a added bonus whatever that may be.