this is what i did. i got some bed liner spray for pickups. then i got about 3-4 12"by 1" strips of stainless steel for a side. then i painted the lip/clip part on the skirt then i measured it to the car so it gives me marks on car. then i got a trusty drill and some aluminum rivets. i drilled 2holes in each metal piece and on the body of the car. then i riveted it into place. i put on the skirt by the lip/chip thingy into the metal pieces. then i drilled some holes under the car like 3 and put rivets there. aafter i put some bed liner so it dont leak, along with cocking. so no rust comes out. takes about 1 hour a said. with figuring out how to do it. probably both sides can be done in 1 hour and 30 minutes. hope this helps.
