I did the work myself. I work in a shop. Basically I pulled off the the impact strip, Sanded everything down with #80 grit paper. Then fill with FIBERAL. Sand that down throw on some ICING, sand, prime, and prep for paint. I found that FIBERAL is the most flexible and can take a hit..found that out the hard way. Im in the middle of a complete repaint and saving antenna, trunk lock hole, 1/4 panel extensions and completely stripped the paint to bare metal. You can get your bumper ready..block the hell out of it. Prep it yourself and have someone paint it for you if you dont have access to a shop.
