Originally posted by Terry Haines:
Can we 'ram' it into an air box etc for more 'pressure' effect,yes but bear in mind a well designed scoop,ram duct etc will only give you around 0.5psi pressure at around 100mph
On my car, I'm using a scoop made by Twowheelin that plugs into 2 1/4 " hose. The hose i routed through the fender, and ended up pluggin it into my KKM filter. The whole ram air setup provides a nice gain, especially at higher speeds. The problem is, if I go into neutral at high speeds (>45 mph), air is still being forced into the engine. The revs plummet, and the car stalls.
Here's a pic that I've posted before regarding this:
Twowheelin has come up with a solution to the problem. Hes got kind of a cone at the filter end of his 2 1/4 " hose, so the air flows over the whole filter, not just the inside part. perhaps that would help...
- Jake
------------------
1995 Duratec MTX
KKM, Aluminum Racing Pedals
17" Borbet Type Ts
Burton Ram Air (thanks twoWheelin)
TH and EGR fix
[This message has been edited by JaketheSnake (edited September 17, 2000).]
