Originally posted by BMorgn66:
3 questions, First, how do you remove the black grille:


It's installed with heat stakes, so you can use an iron to undo the stakes or just cut it. Once I was sure of what I wanted to do, I would just cut it. If you think you would ever want to undo the mod, I would learn to use a heat iron to melt the joint without destroying the grille. This way you can use epoxy to reinstall the mesh if so desired.

Originally posted by BMorgn66:

Can it be ordered without the middle center piece:


No

Originally posted by BMorgn66:

question 2, When that's all said and done whats the best way to fasten the new silver mesh grille:


I would use epoxy in the same area where the heat stakes were.

Originally posted by BMorgn66:

question 3, whats the best way to fasten those in:


I used a u-nut and bolt at each tap used by the factory grille.


Anthony B. Davis 2Deep2 Silver SVT 2002 IASCA SQ Ult Ama 601+ World Champion runner up 2002 SLAP dBQ Champion 2000 USAC SQ World Champion 2002 USACi SQ World Champion