OP
Hard-core CEG'er
Joined: Sep 2002
Posts: 4,294 |
Originally posted by Disturbedpunk289: Originally posted by MapOfTaziFoSho: how hard is this to do? I am terrible with electrical...
ditto
It sounds complicated, the hardest part is not burning yourself with the soddering pencil/pen. It really quite easy. Once you do two or three of them, and I suggest doing the back door switches first. As it is slightly harder to do some of the switches and buttons such as, the drivers door, defrost, and dimmer switches. The Clock is fairly straight forward, and so is the contour/mystique plate. The hvac and gauges, is very simple. I have detail instructions on how to remove the pieces. and get to the bulbs, which are pain to remove, I just broke mine and pulled them out. Other said twist them back and forth then pull them out. I will try it sometime. As for the hvac if you have ever installed a stereo you know the hvac is behind the stereo bezel. Remove the bezel, simple snaps off on pre98 models and unscrewed by four screws on the bottom of the post97 models. then snapped off, then un screw the two screws that hold that hvac on, also the dimmer, pop the dimmer open, and make a few small cuts, and then for the hvac the bulbs, just unplug, and the new ones plug directly in. It really seems hard, but its not, its time consuming.
95 SES Sold
99 SE Sport Sold
99 SVT T-Red Tan Interior. K&N, Magnecors, 19' Theorys, And some audio stuff.
|