Contour Enthusiasts Group Archives Forums Modifications Duratec Performance Heatsheild Prototype 1

Originally posted by pole120:

---

i had an idea for ya man....go to autozone or wherever you go, and get a digital display temp guage like all those minivans have that tell you the outside temp....and run the sensor into your inkake tube. drive around and see what your incoming air temp is before...and after an install of your shield.

just a thought

---

I thought about that, but using some temp tape that we used to use at work alot but not anymore. It has an adhisive on the back, so it will stick to almost anything. Only problem is that it is made to read such high temps, between 250 to 450 degrees, that it might not yeild any decent results. Your idea might just work though. Thanks!