Originally posted by Toadster:
so i've been searching the forums (ALOT!) on this subject - how does one get to the 2 Ohm number? it seems that everyone gets the 1 Ohm / 4 Ohm deal 
also, on the blueprint site - it says the BP1002 is a 1.5 Ohm/VC sub... does that make a difference? (the .5 that is 
)You could try to find a 2ohm sub, or a DVC with 4 ohms per coil.
The BP1002 has a Resistance of 1.5 ohms but the impedance is 2 ohms per coil.
