It was not a very hard job. I had good instructions from the Ford service CD. I had to remove the center consoul and the steering coloum to remove the dash. Only tools required were a ratchet with 4" extension 7, 8 and 10mm sockets and a #30 torx bit or screwdriver. It helps to have a second hand when doing the reinstall (thank you Cheryl, my wife) to reconnect the hoses back there and placing the dash. It takes time to do it right so you need to have a full weekend to do it. The rebonding takes the most time because I found it is best to work in small sections.
PS. Your hands will get cut up a bit but that's expected.
99 CSVT Green/Tan
# 84 of 2760
Built on Wednesday, September 30, 1998
15.376 @ 92.00 MPH Stock
75,000Km
96 Contour GL
2.5L V6 ATX 170,000Km
| 
