Originally posted by bullion:
AS far as the box goes....I would say it depends on how crafty you are. They really aren't hard to make, but you have to make sure you built them to spec with your sub (aka how much air it needs). You probably shouldn't use just any old "wood"...you'll want to use maybe a medium density fiber board. You may check ebay to see if you can find a pre-assembled one for less money.



And make sure the MDF is 3/4". You'll also need to decide if you want ported or sealed design. Once you get it designed, all you need is the MDF, screws, wood glue, and a sealing agent for the inside (silicone sealant). Just make sure your design is stable, strong, and airtight; and your sub will sound all the better. I (200+lbs) can literally jump up and down on my box and it doesn't budge.

I can't wait until I get to build my new box this summer

Beer is my Gatorade. Hooray Beer. '98 "Sport" Pacific Green '98 E0 SVT Silver Frost Pictures