Another fix for the license plate is one of two things. One, get some thin rubber washers to add just a little space between the plate and the holder....two, slightly bend the plate so that the bottom is not touching the holder. If you can, use all four licence screws and use the rubber washers.
Also, do like was said earlier. Listen with the stereo down and the highs off. Why you ask? Because you are listening for the beginning noise of the rattle.
Wanna hear something that really sucked? Had a 84 chev cavalier with this annoying rattle that was in the headliner. YES the headliner! Took a whole lot of a product called poly-fill used in making crafts and LOADED the headliner with it. Fixed the problem
Hope this give a little more help
Rich
'96 Mystique, Zetec, MTX.
---Mods---
Removed both intake resonators and airbox. Installed APC air filter and APC crankcase ventilation filter. Removed exhaust resonator.
Installed XM Satellite Radio. Replaced bad alternator and 175a fusible link...much fun!
Intake plenum---GONE!!!!
My car growls louder than yours.
If I can't buy it, I'll build it...Trust Me!!!!
| 
