Contour Enthusiasts Group Archives Forums Modifications Transaxle How to adjust shifter cables?

When the weight is straight up and down.

Did the 98 ends last night big PITA. Hands are killing from lack of room. Realized there is a small notch on the cable ends. Have to get the end over it and you have to apply a lot of pressure to do so. When you do this it wants to push the cable in, of course, to a point where it's hard to get a hand on it. Had to do both ends. What a PITA the top black one is. Don't know how you get a piece of tape in there to mark the spot. I have a pair of cables lying around with the ends still on for reference. By looking at that and putting the trans in neutral I got them locked in. Nice firm shifting now.