Contour Enthusiasts Group Archives Forums General Troubleshooting bad missing/stumbling...over 3000 rpm and COLD it runs fine

Print Thread

Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine #875201 02/17/04 07:33 PM
Joined: Jul 2000 Posts: 2,382 Kansas City,MO,USA,Earth, Terr... N Nate'sTour Hard-core CEG\'er
Nate'sTour Hard-core CEG\'er N Joined: Jul 2000 Posts: 2,382 Kansas City,MO,USA,Earth, Terr...	It's under the TB up against the vee of the block. A lever that moves back and forth as RPM's rise above 3800 RPM (or so) Can't hurt to look. "Fear is the little death." Muadib.

Entire Thread
Subject	Posted By	Posted
bad missing/stumbling...over 3000 rpm and COLD it runs fine	96contourSE	02/17/04 04:35 PM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	Nate'sTour	02/17/04 05:47 PM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	96contourSE	02/17/04 06:37 PM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	Nate'sTour	02/17/04 07:33 PM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	HITMANinMI	02/17/04 09:42 PM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	chongo	02/18/04 12:13 AM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	96contourSE	02/18/04 12:25 AM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	chongo	02/18/04 12:32 AM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	96contourSE	02/19/04 02:43 AM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	MercuryMystik99	02/19/04 03:11 AM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	95MystiqueLS_dup1	02/19/04 05:24 AM
Re: bad missing/stumbling...over 3000 rpm and COLD it runs fine	96contourSE	02/19/04 09:23 PM

Link Copied to Clipboard