So I decided to do my front brakes today....Driver side was fine, everything came apart and went together fairly straight forward. So I proceed to the Passenger side...big problem. I can't get the bolts holding the calipers off. I put my 1/2" torque wrench to the bottom one (can't fit it in there to get to the top one) and it won't even budge with that on their. Needless to say I can't break the bolt with my ordinary 1/2" ratchet either. What should I do? Unfortunately I don't own air tools, otherwise I would try to get an impact wrench in their. This side is the worst as far as my brakes go too!
