hey guys, im still in the process of installing my new alarm. I have done pretty much all of the ignition and power wires, siren, shock sensor, glass sensor, etc. BUUUUTTT.....
i hooked up the lock and unlock wires to the lock/unlock wires as specified in the "how-to" write up (made sure they are the right ones by running direct 12v to them to lock and unlock the doors), however when I arm and disarm my alarm, the doors will not lock or unlock.
do i need a relay? hopefully somebody can give me some insight into this problem. my alarm basically says that it puts 12v power through these lock/unlock wires to the door lock output wires of the car. so im kind of confused.
and one more question-does anybody know of a detailed write-up explanation of how to hook up the starter disable feature? the instructions for my alarm are pretty vague as far as which wires from the relay go where. once again, thanks for any help. im hoping somebody can contribute.
TIA.
