Hi,
I have a 96 V6 Contour with about 250 000km. My low speed fan has stopped working as of late. I thought it was the resister but after troubleshooting I don't think this is the case anymore.
Yesterday, I pulled out the relay for the low speed. I have five contacts on it. They are numbered: 1, 2, 3, 5 and 7. Using a test light it appears that 1 and 3 are hot, with 3 being hot all the time and 1 when the key is turned on. 5 goes to the motor while 7 appears to be a ground and 2 is nothing. I jumpered across 3 and 5 and the motor went. Now I looked in my Ford book and it says the relay is suppose to have a number 6 post that is a ground, but mine doesn't have this. Also 7 is suppose to be coming from the PCM and I would think this would only ground when it sends a single, not all the time.
Any thoughts?? Do I have a wiring issue? I also checked all with the AC on and things were still the same.
I would appreciate any thoughts.
Thanks
