Originally posted by dUbs-ThReE:
I had no idea! I knew that you could get lot of good parts, but didn't know you could get them into the 14's so easy! Awesome man, can't wait to get a ride.



i didnt know either till i read alot , plus my discount is good on all those nissan parts!

here are some of the factory parts offered

Factory 9.1:1 Pistons
Flat-top piston increases compression ratio from 8.6:1 to 9.1:1. SOHC 12-valve engine (from engine #KA24 012039) only

The KA24E cylinder head has an uncut (surface-to-surface) thickness of 99mm/3.898". Piston dome and combustion chamber must be modified to achieve desired compression and require the use of special Carrillo steel connecting rod (12100-40FGT). Each JE piston is packaged with a .866 diameter wrist pin and (4) Spirolox. When ordering individual pistons, be sure to specify which cylinder (#1 / #3 or #2 / #4).
RACE APPLICATION ONLY!

KA24 Camshaft
When installing any new camshaft, new OE rocker arms must be used. Basic cam specs are indicated in ( ). The R5 Race cam requires the use of JE pistons and alternate valve train components (see below). OE rocker arm ratio is 1.422:1.

»Hi-Performance Cam (.402"/270 Degrees)
»Race Cam (.550"/288 Degrees & .563"/292 Degrees)
»OE Rocker Arm (Intake)
»OE Rocker Arm (Intake)
»OE Rocker Arm (Exh #1 / #3)
»OE Rocker Arm (Exh #2 / #4)

those are just a few nissan parts , im searching bonesyards for a VLSD from a 91 or higher too

2006 KIA RIO LX 5-speed 2003 Escape 3.0L wifes