Todd, The kit that I got from Baer was what they call an early A/Sedan Kit for Fox Body Mustangs. Kit included the 5 lug aluminium hubs, PBR 38mm Calipers and Brackets. .810 12" Rotors drilled to the 4 1/2 Ford Bolt Pattern. They now offer a package that will accomodate the 94 and up Mustangs including 12" rotors with modified brackets and 38mm Calipers. You can do this on a Fox if you update the spindles to 94/96. Also enables increased negative camber. These are to Accomodate the SCCA Rules in A/Sedan. Even the guys running the 94 to 2003 Mustangs have to convert over to the 12" rotor set up and 38mm calipers whether it be the .810 or the 1.1's. Part of the problem also is we are not allowed to run slotted or drilled rotors but we can run the two piece rotor and hat as long as they are not slotted or drilled.
What everone has been doing is buying the Brembro rotors and turning them down to 12". Don't really know how Baer is doing it but they do offer a 12" rotor.
