Read back my friend. Mentioned in prior threads that I was using rotors cut down to 12". Typo they are .810 rotors and are the 12". Because of rules in my class I have had to have the Cobra Brembro Rotors cut down to 12". I have now converted all the fox spindles to SN96 spindles and hubs to so I can use the Cobra Stuff. Break an aluminium hub by Baer lose a wheel and enjoy the ride, I did. No parking lot racing here! Back to the Cast Iron Ford Hubs for me. The whole point is to get away from the Baer Stuff. Can't find a Baer Hub on a Sunday, but the local auto parts will have a Hub at 3/4 the price to finish off a weekend. I'd also like to mention that this change was not a bolt on instalation as the Cobra brackets had to be moved inward because of the 12" rotors. As far as the rears 86/91 Baer Camaro Set up, these will remain in tact, again 12" rotors .810 Anyway it's been fun! Guess maybe Mustang stuff shouldn't be included in Contour Chat your absolutely correct on the confusion. As far as Pads I run the Hawk Blues front and rear. Think I'd take my life in my hands with OTS Pads. Later I'm done.
