Umm, for the door handle LEDs not too long. You can prep the LEDs, resistors, and wiring before hand so that you can just go outside, take the covers off nad start splicing. Should take like 15 min per door once you get the idea. For the console LEDs, obviously it takes alot longer because you gotta remove both consoles and the radio trim piece (remove the radio trim to do the LEDs above the cupholders). Also when drilling in the actual console, you need careful planning to get locations and angles right. All in all, i'd say its a nice weekend project.
Also for those console LED's i wired a switch in, i mounted it inside my driver-side glovebox (mystique-only
), it's sweet.
