Originally posted by hondas_for_breakfast:
Are the blue ones around 2800 mcd as well?


anwsered this in a IM, but for others 3.2k-3.6k

Originally posted by bk4293:
The LEDs are all the same wattage/Volt, the power before the resistor is all 12 volt, so it should be the same resistor in all cases.

I could be wrong, It's happened in the past...too much



All the same, I changed them to a 510, since somebody helped me figure they needed a bigger resistor.

Originally posted by ElKy:
we need to use resistors in-line with these right?
does the value of the resistor required varie depending upon application?




With the new resistors I am sending out, only 1 resistor per led, depending on how you set it up. if you install it the same was as the old one, it requires 1.


Originally posted by bk4293:
Hey man, I'll try to snap some pics the next time I do Mine and Hectors switches if you want. I need to find another defroster switch for Hector. Got any 12V 3mm red LED's?

I really only need one



12v, no, but you can install a 510 ohm resistor on the positive side of the LED, and knock it down. Check out the junk yards I broke mine on my 95 and had to redo it, best place to find them. Now I just need a 98 clock bulb till I order my LEDs.

95 SES Sold 99 SE Sport Sold 99 SVT T-Red Tan Interior. K&N, Magnecors, 19' Theorys, And some audio stuff.